Pump Models

Track Pumps

MODEL INFORMATION

B1 PUMP
One of the most popular pumps ever produced in New Zealand. Renowned for their reliability and ease to service.
There are three different sizes, The Standard (STD), the Low Pressure (LP), the High Pressure (HP)

The Standard (38mm /1 1/2" bore)
·       has a flow rate of 1364 litres per hour (300 gallons)
·       maximum pressure of 108 psi (250ft or 76m vertical lift).
​​
The Low Pressure (44mm /1 3/4" bore )
·       has a flow rate of 1818 litres per hour (400 gallons),
·       maximum pressure of 85 psi (200ft or 60m vertical lift).
​​
The High Pressure (32mm /1 1/4" bore)
·       has a flow rate of 910 litres per hour (200 gallons),
·       maximum pressure of 173 psi (400ft or 121m vertical lift). 
​​
·       Maximum lift (suction side) 7.5m (25ft).
·       Designed for a 1425 rpm electrical motor and uses SAE 30 oil.
 
C1 PUMP
The very popular C1 Piston Pumps are one of the most used pumps. Used for heavy duty water pumping and pressure systems all round the country.  
There are two different sizes, The Standard (STD), and The High Pressure (HP)

The Standard (2 3/4" bore)
has a flow rate of 2273 litres per hour (500 gallons)
maximum pressure of 130 psi (300ft or 91m vertical lift).
​​
The High Pressure (2" bore)
has a flow rate of 1363 litres per hour (300 gallons),
maximum pressure of 216 psi (500ft or 152m vertical lift).
​​
There is also a Low Pressure model, this is a Standard C1 pump with a larger Pump Pulley (14" instead of 12").
Please contact us for details.

Maximum lift (suction side) 7.5m (25ft).
Designed for a 1425 rpm electrical motor and uses SAE 30 oil.

 

We have included exploded views for the DeepWell Gearing ranges. This includes the Model D, the Model DE and the Old Model DC. More information on these pumps to follow.

Track B1 B1 Spec Table Track C1 C1 Spec Table Old Model DC Model DE Model D1